Industrial Products

BTP has a portfolio of products that cater to the mining, manufacturing and transportation industry.

 

 

CONTINUOUS CASTING BARS

We have two horizontal continuous castings and one vertical, where bronze alloys and copper can be cast from 7/8" to 5", with a production of 460 tons a month. These bars are used as raw materials in the extrusion, forging and tooling of varios parts.

The finished product has a high point of plasticity and malleability. It is non-toxic contaminant and corrosive.

Type Diameter Length
Unfinished 7/8" to 5" 1.5 to 4 meters
Finish 7/8" to 5" 1.5 to 4 meters

CENTRIFUGED BUSHINGS

Concentric parts of bronze with a diameter of 5” up to 24” and a maximum length of 130cm. The production capacity is 30 tons per month.

INJECTED PARTS

These parts have an irregular internal configuration as water faucets, fittings, and measuring centers. The Production capacity is 20 tons per month.

CASTED PARTS

The parts are cast in molds with a core to lighten the weight of the part.

EXTRUDED BARS

The ingot is fed in a plastic state on the extruded machine, pressure is then applied, and the specficic shapes, diameter, and length is extruded.

Type Diameter Length
Round ¼" to 4" 5/32" to 2 ½"
Square 5/16" to 4" 5/32" to 2 ½"
Hexagonal ¼" to 4" 5/32" to 2 ½"
Rectangular 3/16" x ¼" x 4 x 3/8"  

These bars are used to manufacture parts for the water, gas, and the electrical industry. Nuts, bolts, locks, latches, and hinges can be manufactured.

SPECIAL ORDERS

Incompliance with the customer specifications, the parts will be forged or tooled.

INDUSTRIAL AND ARCHITECTURAL MOLDINGS

Through the extrusion press, architectural molding with specifics forms "T", "L", and “X" can be obtained. The architectural moldings can be used on various finishes of a house or building.

BARS AND PLATES IN ELECTROLYTIC COPPER

Round, square and hexagonalbars can be manufactured up to 3" and with a purity of 99.9%. Plates can be manufactured with ranges from 3/16 "x 1/2" up to ½ "x 2".

STAMPED PARTS

They are manufactured according to customer's specifications.The quality of the material presents a favorable grain and correct location in creep fibers. The final product has a finish without burrs and blasts.